Golfers can try Avoda irons through an Avoda Precision Fit certified fitting at Outtabounds Indoor Golf in Beeston, Nottingham.

During the fitting, you can compare Avoda same-length and combo-length iron configurations while using launch monitor data to measure launch, spin, carry distance, distance gapping and dispersion.

Yes. Outtabounds provides Avoda Golf iron and wedge custom fittings at its indoor golf facility in Beeston, Nottingham.

The location is convenient for golfers travelling from Nottingham, Derby, Leicester, Loughborough and across the East Midlands. All Avoda fittings are available by appointment.

Avoda same-length irons are designed so that every iron in the selected set uses the same shaft length and lie angle. This allows the golfer to use a more consistent posture, ball position and swing throughout the iron set.

The aim is to reduce the number of setup changes required between clubs, helping golfers create more repeatable contact and a more predictable ball flight.

Avoda combo-length irons combine same-length scoring clubs with variable-length longer irons. In the Origin Combo Length set, the lob wedge through to the 8-iron use the same length, while the 7-iron through to the 4-iron use progressively longer shafts.

This design aims to provide a repeatable setup in the scoring clubs while maintaining suitable launch, spin and distance performance from the longer irons.

A same-length set uses one club length throughout the iron set, allowing the golfer to use a similar posture and swing with every club.

A combo-length set uses the same length for the shorter scoring clubs but retains variable lengths in the longer approach irons. This can suit golfers who want greater consistency around the green without changing the familiar performance characteristics of their long irons.

Neither configuration is automatically better for every golfer. The right option depends on your swing speed, strike pattern, preferred setup, long-iron performance and the areas of your game you want to improve.

Same-length irons may suit golfers who want to simplify their entire iron swing. Combo-length irons may be preferable for golfers who want same-length scoring clubs while retaining progressive lengths in their longer irons. A fitting is the best way to compare the two systems.

Avoda irons can be suitable for beginners because same-length and combo-length systems can reduce the number of setup and swing changes required between clubs.

This can make it easier to develop a repeatable stance, posture and ball position. However, the best set configuration should still be determined through testing because beginners can have very different swing speeds and launch conditions.

Yes. Avoda irons can also suit experienced and lower-handicap golfers who want greater consistency, precise distance control and a set configuration built around their individual swing.

Better players may benefit from testing different set makeups, shafts, lie angles, grips and iron configurations to find the balance between control, forgiveness and workability.

Same-length irons are designed to make the setup and swing more repeatable by using a consistent club length, posture and ball position.

This may help reduce variations in strike and delivery between clubs. The improvement will still depend on your swing and how well the set has been fitted, so it is important to compare performance using launch monitor data rather than relying only on the concept.

Some golfers, particularly those with lower swing speeds, may find it more difficult to generate suitable launch, spin and carry distance from lower-lofted same-length long irons.

This is one reason Avoda offers a combo-length option. The variable-length 4, 5, 6 and 7-irons can help produce the speed and launch required for longer approach shots, while the shorter scoring clubs retain a consistent same-length setup.

Avoda same-length wedges are longer than conventional variable-length wedges, but they are designed as part of a complete same-length system rather than simply being standard wedges with longer shafts installed.

The head weight, lie angle and overall specification are designed to work with the longer length. Many golfers adapt quickly and benefit from using the same posture and setup throughout their scoring clubs.

Simply cutting or extending a conventional set of irons to one length is unlikely to create a properly balanced same-length set.

The clubhead weights, lie angles, swing weights, lofts and shaft characteristics need to be designed to work together. Avoda same-length irons are engineered as a complete system rather than being converted from a standard variable-length set.

Avoda curved-face irons use progressive face curvature designed to influence the ball flight produced by off-centre strikes. The technology is intended to counteract gear effect and reduce unwanted side spin when the ball is struck away from the centre of the face.

Curved-face Avoda irons are available in same-length, combo-length and traditional-length configurations. The best configuration should be selected through a professional fitting.

An Avoda Precision Fit session begins with a discussion about your current clubs, ball flight, strike pattern, typical misses and what you would like to improve.

You will then test different Avoda heads, shafts and set configurations. Launch monitor data and ball flight feedback are used to compare launch angle, spin, carry distance, distance gapping and dispersion.

Avoda Golf iron and wedge fittings at Outtabounds are carried out with Harrison Ottley, Avoda's Head Fitter.

Harrison guides golfers through Avoda's same-length and combo-length options and recommends a complete club specification based on launch monitor data, ball flight and the golfer's individual requirements.

An Avoda Golf iron and wedge custom fitting at Outtabounds normally takes between one hour and one and a half hours.

This provides enough time to discuss your current equipment, test suitable heads and shafts, compare set configurations and review the launch monitor results without rushing the process.

An Avoda Golf iron and wedge custom fitting at Outtabounds costs £50.

The fitting fee is fully deductible from the purchase of Avoda irons or wedges ordered through Outtabounds following the fitting.

The fitting can include testing different iron heads, same-length and combo-length configurations, shafts, shaft flexes, lie angles, club lengths and grip sizes.

The final recommendation is designed so that the irons and wedges work together as a complete system, with suitable distance gaps and consistent performance throughout the set.

Yes. Outtabounds has a range of JumboMax grip sizes available to test during an Avoda custom fitting.

Grip size can influence comfort, control, hand action and how the club is delivered at impact. Testing different options helps identify a grip size that feels secure without creating unnecessary tension.

Yes. Right-handed and left-handed Avoda fitting options are available at Outtabounds.

Select the appropriate dexterity when booking so that the correct fitting equipment can be prepared for your session.

The Avoda Origin irons use premium carbon steel forgings designed to provide a soft and responsive feel at impact.

The forged construction is combined with Avoda's same-length, combo-length or curved-face technologies depending on the model and set configuration selected.

Yes. At the end of your fitting, you will receive a recommended Avoda specification based on the combinations tested during the session.

This can include the iron model, set makeup, same-length or combo-length configuration, shaft model, shaft flex, lie angle, club length and grip type. Your custom Avoda order can then be placed through Outtabounds.

You can book an Avoda Golf iron and wedge custom fitting online through the Outtabounds website. Choose either right-handed or left-handed before adding the fitting to your basket.

Outtabounds is located at 178G High Road, Chilwell, Beeston, Nottingham, NG9 5BB. Fittings are available by appointment.